mirror of
https://github.com/OPCFoundation/UA-.NETStandard.git
synced 2026-10-20 00:31:32 +08:00
fix/encoder-stack-depth-json-flake
4 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
5572107ab8 |
Push Model compliance: UpdateCertificate issuer check, TrustList audit events, NoConfiguration state, DefaultHttpsGroup (#4684)
# Description
Fixes found by a manual run of the OPC 10000-12 *Push Model for Global
Certificate and TrustList Management* test plan (183 test cases,
TC0–TC182) against the Reference Server. After these changes no test
case fails; the remaining non-pass verdicts are test-plan expectations
that contradict Part 12/Part 4/Part 20 (documented in the run report).
### Server behaviour changes
- **UpdateCertificate requires the issuer in the TrustList**
(`ConfigurationNodeManager.PushValidation.cs`). The validator classifies
an incomplete chain as suppressible; OPC 10000-4 Table 100 does not ("An
error during the chain creation may not be suppressed") and §7.10.5
requires the issuers to already be in the group's TrustList. A
certificate of an unknown CA is now rejected with
`Bad_CertificateChainIncomplete`. Expiry / host-name errors stay ignored
as §7.10.5 requires.
- **TrustList audit events reach the Server Object.**
`TrustListUpdateRequested`/`TrustListUpdated` were reported on the
TrustList node (`EventNotifier=0`, not linked to the Server), so no
client could receive them. `TrustList.SetAuditEventServer` routes them
through `IAuditEventServer`; wired for the Push TrustLists and the GDS
CertificateGroup TrustLists. New `AuditEvents` overloads keep the
node-based ones.
- **Duplicate AddCertificate** no longer makes the following
ApplyChanges fail with a bare `Bad` (store refused the second copy); the
commit is idempotent and its rollback keeps the pre-existing
certificate.
- **CloseAndUpdate validates CRLs** (incl. CRL-only updates): every CRL
must be signed by a CA of the new TrustList (§7.8.2.5). Previously an
unknown/forged CRL passed CloseAndUpdate and only failed ApplyChanges.
- **X.509 v1 certificates are rejected** by
CloseAndUpdate/AddCertificate/UpdateCertificate (OPC 10000-6 §6.2.2; new
`X509Utils.IsX509Version3`).
- **Application setup state (Annex G.2):** new
`StandardServer.StartupServerState` (virtual); the DI host returns
`NoConfiguration` when `ServerConfigurationOptions.InApplicationSetup ==
true`. `IsRunning` and `NodeManagerLifecycle` treat `NoConfiguration` as
operational. The Reference Server `--provision` mode starts in
`NoConfiguration` and exposes `InApplicationSetup=TRUE`.
- **DefaultHttpsGroup:** the group is only created when Https stores are
configured — the Reference Server config had none, so its
`opc.https`/`opc.wss` endpoints used the RSA application certificate
with an empty TLS trust list and the Https certificate could not be
pushed. The sample config now declares
`HttpsIssuerCertificates`/`TrustedHttpsCertificates` and an
`HttpsCertificateType` certificate (new `CertificateTypeString` value
`Https`). An Https certificate is assigned to DefaultHttpsGroup only (no
longer also listed in DefaultApplicationGroup). Fixed
`AddSecurityConfigurationHttpsStore`, which built the trusted Https
store path from the store *type*.
- Minor: AddCertificate logs a warning when it adds a CA without a CRL
while `RejectUnknownRevocationStatus` is enabled; UpdateCertificate
refused for an insufficient SecureChannel raises
`CertificateUpdateRequestedAuditEvent` with Status=false.
### Kept on purpose
- PEM certificates are accepted (converted to DER).
- `Bad_NotWritable` when opening an already open TrustList (OPC 10000-20
§4.2.2) and for AddCertificate while a read handle is open (§7.8.2.6).
- No validation rules for DefaultUserTokenGroup / DefaultHttpsGroup
TrustLists (Part 12 defines them only for ApplicationCertificateType
groups).
### Notes for reviewers
- Existing tests in `ConfigurationNodeManagerPushTests` and
`PushCertificateRequestRegressionTests` signed pushed certificates with
CAs that were not in the TrustList; they now trust their CA first
(behaviour change above).
- Adding the Https certificate to
`Quickstarts.ReferenceServer.Config.xml` gives the Reference Server's
opc.https/opc.wss endpoints their own TLS certificate.
### Tests
-
`tests/Opc.Ua.Server.Tests/Configuration/PushComplianceRegressionTests.cs`
— duplicate add/rollback, PEM, v1/v3, CRL issuer/forged/CRL-only, audit
routing.
- `tests/Opc.Ua.Server.Tests/ApplicationSetupServerStateTests.cs` —
NoConfiguration startup state.
- `tests/Opc.Ua.Gds.Tests/PushComplianceTests.cs` — end-to-end over a
secure channel: TrustList transaction lifecycle, open-handle rules,
masked reads, duplicate/PEM add, unknown CRL issuer, unknown certificate
issuer, cross-Session CSR key, nonce rules, RemoveCertificate chain/CRL
handling. Mutation-checked: reverting the issuer, duplicate-add and CRL
fixes makes the corresponding tests fail.
- Additional cases in `PushCertificateRequestRegressionTests`,
`CertificateIdentifierTests`, `ApplicationConfigurationBuilderTests`.
Local runs (net10.0): Opc.Ua.Gds.Tests 1257 passed / 0 failed / 56
skipped; Opc.Ua.Server.Tests push/TrustList/audit/lifecycle subset 1209
passed; Core and Configuration test classes passed. net48 build of the
affected test projects succeeds; `dotnet format whitespace` clean.
## Related Issues
- None (findings from a manual Push Model compliance run).
## Checklist
- [x] I have signed the
[CLA](https://opcfoundation.org/license/cla/ContributorLicenseAgreementv1.0.pdf)
and read the
[CONTRIBUTING](https://github.com/OPCFoundation/UA-.NETStandard/blob/master/CONTRIBUTING.md)
doc.
- [x] I have added tests that prove my fix is effective or that my
feature works and increased code coverage.
- [ ] I have added all necessary documentation.
- [x] I have verified that my changes do not introduce (new) build or
analyzer warnings.
- [ ] I ran **all** tests locally using the **UA.slnx** solution against
at least .net **framework** and .net **10**, and all passed.
- [ ] I fixed **all** failing and flaky tests in the CI pipelines and
**all** CodeQL warnings.
- [ ] I have addressed **all** PR feedback received.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
|
651beaee1e |
Fully support AliasNames in ConsoleReferenceServer (#4012) (#4321)
# Description The CTT AliasName conformance units skip or fail against the ConsoleReferenceServer. `AliasName Base` skips with *"No instance of AliasNameType has been found in the address space"*; `Category Tags`, `Category Topics` and `Hierarchy` fail. Part 17 support landed in #3779, but aliases live only inside the `IAliasNameStore` — nothing is browsable, no `AliasNameCategoryType` is nested under another, and the Topics aliases point at the Server object rather than at a `PublishedDataSetType` instance. Part 17 §6.2 clients — the CTT among them — discover aliases by browsing, not only by calling `FindAlias`. This PR materializes the store contents as real nodes and fills the three gaps. ### SDK — `Opc.Ua.Server` * **`DiagnosticsNodeManager.MaterializeRegisteredAliasNameNodesAsync`** (new, opt-in) walks every registered `IAliasNameStore` and creates one `AliasNameType` instance per alias — BrowseName carrying the alias name, `AliasFor` references to its targets, and the inverse `HasAlias` reference on each local target (via `externalReferences`, since targets usually live in another node manager) — plus an `AliasNameCategoryType` instance for every store category the standard NodeSet does not already ship. Categories whose NodeId belongs to another node manager are skipped, so an `AliasNameNodeManager` that also registers its store with the server-wide registry does not get its NodeIds claimed twice. Opt-in: servers that only need the well-known `FindAlias` to answer from their store pay nothing. The nodes are a snapshot taken at address-space creation — later mutations change what `FindAlias` returns but do not add or remove nodes. * **Optional Part 17 methods on the well-known categories.** The same pass instantiates whatever a category declares through `AliasNameCapabilities`: `FindAliasVerbose` (§6.3.3), `AddAliasesToCategory` (§6.3.4), `DeleteAliasesFromCategory` (§6.3.5) and `LastChange` (§6.3.1). Mutations require a `SecurityAdmin` caller on a `SignAndEncrypt` channel; the gate previously private to `AliasNameNodeManager` moved to `AliasNameMethodDispatcher` so both paths share one implementation. * **`LastChange`** is now tracked per category rather than only for the standard `Aliases` node, and the duplicated seeding logic collapsed into one helper. ### Reference server * A nested **`Devices`** category under `TagVariables` holds `Pump1_Status` and `Heater_Power`. `FindAlias` on `TagVariables` still returns all six names through subtree recursion, while `FindAlias` on `Devices` returns exactly two — which is what the Hierarchy unit checks. * `ReferenceServerConfigurationNodeManager` creates three **`PublishedDataSet` instances** under `PublishedDataSets` (`i=17371`) and the Topics aliases now target them, satisfying the *"is a Dataset"* check. These are address-space instances only — no PubSub runtime is added, and the CTT only inspects the target's type definition. ## Note for reviewers — the reserved NodeIds The optional children are created at the NodeIds the OPC Foundation reserves for them (`Aliases.FindAliasVerbose` = `i=24054`, `TagVariables.LastChange` = `i=32854`, …). Those identifiers are allocated in `StandardTypes.csv` but are **not** declared in the ModelDesign and **not** present in the published NodeSet, because the standard address space does not instantiate optional children. The source generator therefore emits no parent-to-instance mapping and no `MethodIds` constants for them, so `DiagnosticsNodeManager.ReservedChildIds` supplies the nine method ids and the two missing `LastChange` ids explicitly, each traceable to its registry row. The 18 argument-property ids do have generated `VariableIds` constants and are referenced through those. I deliberately did **not** "fix" this by declaring the children in `tools/Opc.Ua.SourceGeneration.Core/Design/StandardTypes.xml`: that file is a verbatim copy of upstream `UA-ModelCompiler/Design.v105/StandardTypes.xml` (the only differences today are upstream being newer), so a local edit is lost on the next sync and the NodeIds would silently revert to factory-minted ones. `docs/AliasNames.md` records this. Worth raising upstream separately: `StandardTypes.csv` allocates `Aliases_FindAliasVerbose` and siblings while the ModelDesign never declares those children, so the ModelCompiler cannot emit ids it has itself reserved. If that is ever reconciled, `ReservedChildIds` becomes redundant and deletes cleanly. ## Related Issues - Fixes #4012 ## Checklist - [x] I have signed the [CLA](https://opcfoundation.org/license/cla/ContributorLicenseAgreementv1.0.pdf) and read the [CONTRIBUTING](https://github.com/OPCFoundation/UA-.NETStandard/blob/master/CONTRIBUTING.md) doc. - [x] I have added tests that prove my fix is effective or that my feature works and increased code coverage. - [x] I have added all necessary documentation. - [x] I have verified that my changes do not introduce (new) build or analyzer warnings. - [ ] I ran **all** tests locally using the **UA.slnx** solution against at least .net **framework** and .net **10**, and all passed. — **not done: verified on net8.0 only** (Server 4710, InformationModel 1099, Core 4443, plus the client and features alias suites; AOT build clean). Needs a run against net framework and net10 before this leaves draft. - [ ] I fixed **all** failing and flaky tests in the CI pipelines and **all** CodeQL warnings. - [ ] I have addressed **all** PR feedback received. ### Tests `tests/Opc.Ua.InformationModel.Tests/Aliasname*Tests.cs` mirror the four CTT conformance units and no longer `Assert.Ignore` where the CTT reported failures — the alias suite is 37 tests with no skips. New `AliasnameOptionalMethodsTests` covers the optional methods, their reserved NodeIds, the anonymous-caller denial, an add/find/delete round trip and `LastChange` advancing on mutation. One pre-existing test changed premise: `EnumerateSubCategoriesAsyncOnLeafReturnsEmptyAsync` asserted that `TagVariables` has no sub-categories, which this PR deliberately makes false. It now targets `Topics` (still a leaf) and a new test guards the nesting. 🤖 Generated with [Claude Code](https://claude.com/claude-code) --------- Co-authored-by: Claude Opus 5 <noreply@anthropic.com> Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com> Co-authored-by: romanett <7413710+romanett@users.noreply.github.com> Co-authored-by: marcschier <11168470+marcschier@users.noreply.github.com> |
||
|
|
d547747e22 |
Generate ReferenceNodeManager address space from a NodeSet2 model (#4220)
# Description The CTT/compliance `ReferenceNodeManager` built its ~6,000 node address space entirely in imperative C#. This PR migrates it to a source-generated `[NodeManager]` partial driven by an exported NodeSet2 model (`ReferenceServer.NodeSet2.xml`), mirroring the `MinimalBoilerServer` sample and completing the goal of issue #4204. The address space is now materialized from the model by the source generator. The large orchestration body was kept but converted from create-based to **find-instead-of-create**: each `Create*` primitive now looks up the model-materialized node via `FindPredefinedNode<T>` and re-applies runtime values, DataAccess metadata, and write handlers, rather than constructing nodes from scratch. This keeps the deterministic value seeding and behavior wiring intact while the structure comes from the model. ## Notable details for reviewers - **Idempotent reference wiring.** The mesh references in the `References` folder are already present in the model, so the historic manual `AddReference` calls would throw on duplicates. Added a small `AddReferenceIfMissing` helper so those calls are safe. - **Non-string NodeIds.** The `NodeIds` folder assigns numeric / GUID / opaque NodeIds. The model exports those nodes with their final ids, so find-by-string-path no longer works; added `CreateVariableById(NodeId)` to locate them by their real id. - **Generator bug fix (worth a careful look).** `ModelDesignExtensions.GetValueRankAsCode` reconstructed `ValueRank` as `dimensions.Length + 1`, so a node with `ArrayDimensions="3,3"` was emitted as `ValueRank = 3`. This affected **any** NodeSet2 with a fixed multi-dimensional array (rank-3 matrices, `BadTypeMismatch` on whole-matrix writes, wrong decoded dimensions). Corrected to `dimensions.Length` and updated the unit tests that had codified the off-by-one. ## Validation - `ReferenceServerTest`: 44/44 on net10.0 and net48 - `Opc.Ua.SourceGeneration.Core.Tests`: pass on net8.0/net9.0/net10.0/net48 - Integration on net10.0: ComplexTypes, Client, History, Sessions, Subscriptions all pass - Clean build, no new analyzer warnings ## Related Issues - Fixes #4204 ## Checklist _Put an `x` in the boxes that apply. You can complete these step by step after opening the PR._ - [ ] I have signed the [CLA](https://opcfoundation.org/license/cla/ContributorLicenseAgreementv1.0.pdf) and read the [CONTRIBUTING](https://github.com/OPCFoundation/UA-.NETStandard/blob/master/CONTRIBUTING.md) doc. - [x] I have added tests that prove my fix is effective or that my feature works and increased code coverage. - [ ] I have added all necessary documentation. - [x] I have verified that my changes do not introduce (new) build or analyzer warnings. - [x] I ran **all** tests locally using the **UA.slnx** solution against at least .net **framework** and .net **10**, and all passed. - [ ] I fixed **all** failing and flaky tests in the CI pipelines and **all** CodeQL warnings. - [ ] I have addressed **all** PR feedback received. --------- Co-authored-by: Copilot App <223556219+Copilot@users.noreply.github.com> |
||
|
|
7cec2d614d | Move repository files to the consolidated layout |