UA-.NETStandard/samples/Robotics/BinPickingClient

Bin Picking Client

This sample closes the perception-to-action loop against the BinPickingCell server: it connects, discovers the Robot Intent controller and its lookup tables (Bin, Fixture, ParallelGripper), requests command authority, and — with --mcp — hosts the composed Vision + Robotics MCP catalogue so a language model can drive the cell while a human watches. With --view, it can also open the in-process OpenUSD viewport so the same session is observable in 3-D while the agent runs.

The MCP catalogue exposed to the agent contains 81 tools measured from the running host: 43 Vision tools + 42 Robotics tools − 4 shared connection tools. This includes vision_get_frame, which returns the eye-in-hand camera image as an MCP ImageContentBlock so the model genuinely sees pixels; the one-call robotics_vision_pick; typed intent/mission tools; and the state, authority, paging and bounded-wait tools needed to plan against refusals.

MCP hosting

With --mcp, the client exposes the composed catalogue so an LLM can discover controllers, read state, request authority, capture frames from the eye-in-hand camera, submit Pick and Place intents, wait on operations, pause / resume / cancel / retry, and re-inspect the world — all through the same SampleSession the sample opened. The Vision and Robotics tools share the connection, so an agent that captures a frame and submits a Pick is observing and commanding the same cell.

MCP hosting is compiled for net8.0, net9.0, and net10.0. It is unavailable on net48; running that leg with --mcp reports the limitation on stderr. Without --mcp, the sample continues to run on every framework it builds for.

MCP options:

• --mcp enables MCP hosting.
• --transport stdio|http|sse selects the MCP transport. sse is accepted as an alias for http.
• --port <number> selects the Streamable HTTP port. The default is 5170, chosen so it does not collide with IntentViewerClient's default of 5100.

Transport selection is announced on stderr:

• No --transport and no --view: stdio is selected by default.
• No --transport with --view: HTTP is selected automatically and the client explains that MCP stdio uses stdout for protocol frames, which cannot safely coexist with the in-process OpenUSD viewer.
• --transport http with or without --view: HTTP is used.
• --transport stdio without --view: stdio is used.
• --transport stdio --view: the explicit request is honored, but the client warns plainly that the viewer may share stdout and corrupt the MCP stdio protocol.

Example MCP client configuration for viewport mode:

{
  "servers": {
    "bin-picking": {
      "url": "http://localhost:5170/mcp"
    }
  }
}

Run the sample with HTTP MCP and the viewport:

dotnet run --project samples\Robotics\BinPickingClient\BinPickingClient.csproj --framework net10.0 -- --server opc.tcp://localhost:62855/BinPickingCell --insecure --view --mcp --transport http --port 5170

For stdio MCP, point the MCP client at the command instead:

{
  "servers": {
    "bin-picking": {
      "command": "dotnet",
      "args": [
        "run",
        "--project",
        "samples\\Robotics\\BinPickingClient\\BinPickingClient.csproj",
        "--",
        "--server",
        "opc.tcp://localhost:62855/BinPickingCell",
        "--insecure",
        "--mcp"
      ]
    }
  }
}

Agents can submit only what the server advertises and accepts. Refusals are returned to the agent as tool results and are never retried on the agent's behalf; the agent must decide whether to re-plan, ask for operator action, or stop.

Scripted demonstration mode

Use --demo to run the whole loop without an agent attached. This is what makes the sample runnable in CI and by someone without an MCP client, and it is how the loop is proven:

dotnet run --project samples\Robotics\BinPickingCell\BinPickingCell.csproj -- --insecure
dotnet run --project samples\Robotics\BinPickingClient\BinPickingClient.csproj --framework net10.0 -- --server opc.tcp://localhost:62855/BinPickingCell --insecure --demo

The demo runner:

1. Discovers the sole Robot Intent controller advertised by the cell and prints its browse name and NodeId.
2. Requests command authority for this session.
3. Attempts to reach the sole Vision inference pipeline advertised by the cell, captures a frame's worth of detections, composes the target part's pose from the camera_eih frame into the world frame using the Vision frame graph, and logs the composed pose.
4. Resolves the source location (--source, default Bin), destination location (--destination, default Fixture) and tool (--tool, default ParallelGripper) against the controller's Locations and Tools lookup tables.
5. Builds and submits a Pick intent for the chosen part with a unique IntentId, waits for the returned operation to reach a terminal state, and logs the result.
6. Builds and submits a Place intent for the same part with a unique IntentId, waits for the returned operation to reach a terminal state, and logs the result.
7. Re-runs inference and compares detections before and after: if the target part disappears or its pose changed, the world state was observed to change as expected; otherwise the runner reports the mismatch plainly.

Use --part <ClassLabel> to pick a different part (RedCube, GreenCylinder, BlueSphere, YellowSlab, OrangeBrick) and --source / --destination / --tool to retarget without a rebuild.

Transcript from an actual run against the current cell:

Controller: BinPickingController (ns=3;s=7001_Controllers_BinPickingController)
Command authority: granted for this session.
Pick admitted: intent binpickclient-20260810191928321-pick operation ns=3;s=7001_Controllers_BinPickingController_Intents_binpickclient-20260810191928321-pick-...
Pick operation terminal state: Succeeded failure=None
Place admitted: intent binpickclient-20260810191928321-place operation ns=3;s=7001_Controllers_BinPickingController_Intents_binpickclient-20260810191928321-place-...
Place operation terminal state: Succeeded failure=None

Notes on Vision inference in the current cell

The client resolves the cell's Vision nodes by browse path from the Vision root, so a Server that materialises Vision as instances in its own namespace — which is what the fluent builder produces, and what this cell is — is discovered correctly. --demo verifies the world change through the client-side detection loop: it captures the detections before the Pick, submits Pick and Place, re-runs inference, and reports whether the target part is still where it was.

The check is honest in both directions. If the part was never detected before the Pick, the run is reported as inconclusive rather than as a pass, because "it is gone now" proves nothing about a part that was never there.

Viewport mode

The viewer is deliberately optional: BinPickingClient does not reference it, and loads Opc.Ua.OpenUsd.Connector.Viewer.dll by reflection from its own output directory. Nothing puts it there for you, so --view on a fresh clone degrades to headless with a message on stderr. Publish the viewer once and copy its output beside the client:

dotnet publish tools\Opc.Ua.OpenUsd.Connector.Viewer\Opc.Ua.OpenUsd.Connector.Viewer.csproj `
    -c Release -f net10.0 -r win-x64 --self-contained false -o $env:TEMP\viewer-publish

Copy-Item "$env:TEMP\viewer-publish\*" `
    samples\Robotics\BinPickingClient\bin\Release\net10.0 `
    -Recurse -Force -Exclude "*.deps.json","*.runtimeconfig.json"

Publish rather than copying the viewer's bin directory: the viewport pulls in the Avalonia UI stack and the per-RID native OpenUSD renderer on top of its own assembly, and only a publish resolves that whole closure. Excluding the two JSON files matters as well - they describe the viewer as an application, and letting them overwrite the client's own leaves the client unable to start.

Then run, from the client's output directory so the native payload resolves:

samples\Robotics\BinPickingClient\bin\Release\net10.0\BinPickingClient.exe `
    --server opc.tcp://localhost:62855/BinPickingCell --insecure --view

Add --demo to run the scripted pick-and-place while the viewport is open, which is the quickest way to watch the loop close in 3-D. The two are sequenced deliberately: the viewport opens first, the client waits for the live OpenUSD stream to be subscribed, and only then commands the robot, so the motion happens with something watching. The window stays open when the loop finishes so the cell can still be inspected.

Both the arm and the parts move. The six joints follow AxisState.Position, and each part follows its own world position variable under Server/WorldState, so a part that is picked travels with the gripper and stays where it is placed.

Where a released part ends up

A placed part comes to rest on whatever is underneath it — the bench, the fixture plate, a locating peg, or another part. It is a resting model rather than a physics engine: no toppling, no friction, no sliding, because none of those change the answer a pick-and-place cell needs, which is that a part released over a bench ends up on the bench and a part released over another part ends up on top of it rather than inside it.

Two consequences worth knowing:

• Stacking is automatic. Place a second part at the same location and its base lands exactly on the first one's top. Three parts placed on the fixture measure bases 0.8380 / 0.8780 / 0.9080 against tops 0.8780 / 0.9080 / 0.9320 — no gaps, no intersections.
• A Place descends before it releases. The cell knows it is carrying something, because a Pick travels with the gripper empty and closes on arrival while a Place travels loaded and opens, so it moves to the height that leaves the part on its support. Releasing is a release, not a drop from the approach height.

The arm will also refuse to reach through its own bench. Several inverse-kinematic solutions for a target near the surface pass a link through it, and the solver now takes the nearest one that does not, reporting WorkSurface when every solution would.

Which camera the viewport opens on

The viewport opens on /World/ObserverCamera, a fixed camera authored in the stage that frames the whole cell from the front and slightly above: the bench centred, the fixture on the left, the bin on the right, and enough room for the arm to reach up without leaving the frame. It is a fixed observer, so the arm moves within a steady view rather than the view chasing the arm.

• --camera auto hands framing back to the viewer, which fits the scene bounds.
• --camera <primPath> opens on any other camera in the stage.

The stage has a second camera, /World/Robot/Palletizer/.../Flange/Camera, which is the eye-in-hand sensor the Vision model renders from. Opening the viewport on it shows what the tool sees rather than the cell, which is occasionally useful for debugging the perception path but is not a view of the robot working.

The observer camera's numbers were fitted to a reference framing and then corrected against what the viewer actually rendered, because the analytic placement and the rendered result disagreed. Treat them as measured rather than derived: change one and re-check the framing against a capture.

Diagnosing the live stream

Pass --verbose to raise the log level to Debug. The OpenUSD connector then reports what it bound at start-up:

OpenUSD live stream bound 12 binding(s) across 10 representation(s) and is
monitoring 12 item(s).

and one line per live update, plus a warning for any target it had to leave unresolved. That last one matters: the §5.8 profiles fail closed, so a source value in a shape a profile does not accept produces a prim that silently never moves while every subscription counter says the data is flowing. It is worth knowing which of the two you are looking at.

Viewer-only sessions receive external motion

A client started with --view alone can observe motion commanded by a different OPC UA session. The OpenUSD connector creates a classic Subscription; ManagedSession uses the V2 subscription engine by default. The V2 publish manager therefore includes created classic session subscriptions when sizing its Publish-worker pool, even when it owns no V2 subscriptions of its own. This is the normal observer shape: two Publish workers stay active and dispatch the classic subscription's notifications to the live USD sink.

The viewer host also runs its long-lived StageReadyAsync callback outside Avalonia's UI synchronization context, per openusd-dotnet#17. These are separate requirements: the callback must remain runnable, and the OPC UA session must issue Publish requests for every subscription API it supports. Pass --verbose to verify both PUBLISH Worker #... - STARTED and OpenUSD live update: ... messages while another client drives the cell.

The client fetches the cell's served OpenUSD assets automatically whenever the viewport opens, into a per-user cache directory. Pass --fetch-assets <dir> only when you want the fetched stage written somewhere you choose, for example to inspect stage.usda by hand.

Where the viewer assembly or renderer payload is missing, the client says so plainly on stderr and continues without opening the viewport. The renderer payload supports win-x64, linux-x64 and osx-arm64; substitute the matching -r value above.

Agent workflow for vision-guided bin picking

Use --mcp --view when an LLM agent should drive the same cell a human watches. The perception-to-grasp loop is deliberately short: observe the cell, request authority explicitly, then let robotics_vision_pick run inference, select one detection and submit the Pick/Place mission on the same OPC UA session.

sequenceDiagram
    participant Agent as LLM agent
    participant Robotics as Robotics tools
    participant Cell as BinPickingCell server

    Agent->>Robotics: robotics_list_controllers
    Robotics->>Cell: browse Server/RobotIntent/Controllers
    Cell-->>Agent: BinPickingController
    Agent->>Robotics: robotics_request_control
    Robotics->>Cell: RequestControl
    Cell-->>Agent: granted
    Agent->>Robotics: robotics_vision_pick
    Robotics->>Cell: RunInference
    Cell-->>Robotics: DetectionResult + provenance
    Robotics->>Cell: SubmitMission(Pick, Place)
    Cell-->>Agent: selected detection + Mission handle
    Agent->>Robotics: robotics_wait_mission
    Robotics->>Cell: observe Mission ExecutionState
    Cell-->>Agent: terminal Mission result

The agent's tool sequence to pick and place one part:

agent -> robotics_list_controllers()
server -> [{ name: "BinPickingController", nodeId: "ns=3;s=7001_Controllers_BinPickingController" }]

agent -> robotics_read_controller(controller="BinPickingController")
server -> SupportedIntents includes Pick and Place; locations include Bin,
          Fixture and per-part staging; tools include ParallelGripper.

agent -> robotics_read_state(controller="BinPickingController")
server -> Ready=true, OperationalMode=AutomaticExternal, ControlOwner=<other session>

agent -> robotics_request_control(controller="BinPickingController")
server -> { granted: true }

agent -> robotics_vision_pick(request={
    controller: "BinPickingController",
    pipeline: "BinPickingPipeline",
    source: "Bin",
    tool: "ParallelGripper",
    destination: "Fixture",
    classLabel: "RedCube",
    minimumConfidence: 0.9,
    missionId: "place-red-cube"
})
server -> {
    provenance: { resultId: "run-...", selectedDetection: { classLabel: "RedCube", ... } },
    missionSubmission: { accepted: true, missionId: "place-red-cube", operation: "ns=..."}
}

agent -> robotics_wait_mission(
    controller="BinPickingController",
    missionId="place-red-cube",
    missionNodeId="ns=...",
    timeoutMs=30000)
server -> { completed: true, terminalState: "Succeeded", ... }

If safety refuses the intent, the agent must observe the failure, re-read state, and either re-plan (for example, retry with a different tool or target location), ask for operator action, or stop.

The lower-level vision_run_inference, vision_read_detection_result, robotics_submit_pick and robotics_submit_place tools remain available when an agent needs to inspect or control each stage separately.

--insecure is for localhost demos only. It accepts any server certificate for localhost demos; do not use it for production systems.