This image format is quite legacy, but uses half as much bandwidth as
the closest XRGB8888, at 16bpp instead of 32bpp, so it is useful to
support on the slowest/oldest display controllers.
Load context_menu.lua when --d3d11-exclusive-fs is enabled and open it
instead of the native context menu. Native context menu cannot be
displayed over the exlusive window.
Fixes: #18181
Decrypts a stream that was encrypted as a whole with AES in CTR mode,
with a key of 128, 192 or 256 bits. The counter block is the IV plus
the index of the block as a 128 bit big endian number, so the stream
seeks wherever the inner stream does.
Build the whole frame, including the synchronized update sequences, in
a buffer acquired from the terminal swapchain and present it, so it is
written while the next frame is rendered.
The console write of a frame blocks until the terminal has consumed it,
which at large sizes takes as long as encoding the next frame. Present
each frame through the terminal swapchain instead, so the write overlaps
with scaling and encoding the next one.
--vo-sixel-rows and --vo-sixel-cols replaced the terminal's cell counts
while the canvas kept the terminal's pixel size, and --vo-sixel-top and
--vo-sixel-left kept it too, so the image ran past the bottom and
scrolled the terminal. Take the cell size from what the terminal
reports, and size the canvas in those cells from where the image
starts, or as the options say.
The status line is written from the main thread while vo_sixel, vo_kitty
and vo_tct write frames from the VO thread, so it could land inside a
frame. Add a lock that the status line holds for a write and the VOs for
a frame.
ANGLE removed its D3D9 backend along with
EGL_PLATFORM_ANGLE_TYPE_D3D9_ANGLE, so context_angle.c no longer builds
against current ANGLE headers.
Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Julius Bairaktaris <julius@bairaktaris.de>
set_params() treated 0 as unset, but 0 is mono, so stereo-in=mono was
a no-op and the only way to drop a stereo 3D mode was stereo-in=no,
which wrote the invalid value -1 into the image params. Use -1 as the
unset default like rotate does, so no keeps the source mode and mono
overrides it.
This is a revert of a6f3236c3a with bestvideo* added. Dropping the
default format was meant to follow yt-dlp's `bv*+ba/b`, but yt-dlp only
selects that when it finds ffmpeg to merge the tracks. Otherwise it
falls back to `best`, a muxed format, which is most of the time is not
optimal selection.
Add ad_dsd, a pass-through decoder converting raw DSD audio to DoP frames, enabled with --audio-spdif=dsd. DST compressed audio is losslessly decompressed to DSD first.
DoP output requires an AO with support for the format (currently
ao_wasapi in exclusive mode) and a DoP capable DAC. Will fallback to PCM
if not supported.
Passing a disc image directly (e.g. `mpv disc.iso`) previously fell
through to FFmpeg. Route it to the matching disc backend instead,
like the VIDEO_TS.IFO/AUDIO_TS.IFO/BDMV redirectors already do.
DVD-Audio discs carry an Audio Still Video Set (ASVS). An MPEG-2 still
images (cover art, booklet/lyric pages) that the disc associates with
tracks.
A new STREAM_CTRL_GET_STILL returns the still for a given playback time.
demux_disc exposes it as a selectable mpeg2video track and injects the
still as a keyframe at the track's playback time. It changes as playback
crosses track boundaries (and follows onset times when a disc encodes
them).
--dvda-page (with the new STREAM_CTRL_SET_STILL_PAGE) forces a specific
still page instead of the scheduled one. The still state is guarded by
a mutex, runtime page changes arrive from the player thread while the
demuxer thread extracts stills.
Add a dvda:// protocol backed by libdvdread. Audio title sets are
enumerated from the ATS IFOs. Each ATS title is exposed as an mpv
title/edition and its tracks as chapters.
Menus are not supported, they would need full VM implementation, and
libdvdnav currently doesn't support DVD-Audio.
Still images (ASVS) may be supported in the future.
User-facing entry point for in-disc menu navigation. The command
forwards an action (up/down/left/right/select/menu/title-menu/popup/
prev/mouse-move/mouse-click) to the current disc stream handler.
The new discnav input section allows binding controls that are only
active while a disc menu is on screen.
Setting the edition property on a disc jumps to the title through the
stream directly, so selecting the currently-playing edition can still
return to it from a menu.
Add primaries, transfer, max_luma and video_colorspace arguments.
Allows tagging the colorspace of the overlay bitmap instead of assuming
sRGB. video_colorspace interprets the bitmap in the video's colorspace,
so it is tone mapped exactly like the video. max_luma overrides the
luminance peak of the bitmap. Currently only vo_gpu_next honors these
parameters. vo_gpu keeps its sRGB assumption regardless of the tag.
Fixes#10678
Change --hwdec-extra-frames default to auto, which sizes fixed hw frame
pools from the number of frames the VO declares to reference, instead of
a static guess. Fixes pool exhaustion with e.g. --interpolation and a
tscale filter with larger radius.
Fixes: #18205
The file-local-options property sets options that are reset when file
change occurs. This is different from per-file options which are set with
--{ commandline arguments and options parameter of the loadfile command.
Per-file options use file-local option mechanism for setting options when
the file is loaded, but they are persistent and stay with the playlist
entries, unlike file-local-options set at runtime.
This corrects the on_load hook documentation about the effect of setting
file-local-options.
This allows controlling whether the files in a playlist inherit the
per-file options of the playlist file itself. For playlists created
by --autocreate-playlist, --playlist-inherit-options=current allows
inheriting only for the item the playlist is created from.
Previously, you could only provide a CRT FD, which works great for the
most part, but when using CreateProcess on Windows, it requires the use
of the reserved fields of STARTUPINFO to inherit the FD to a child mpv
process. This becomes a problem for example if you use Go's os/exec API,
which does not expose a way to set those reserved fields. Exposing a way
to allow passing handles directly fixes the mentioned scenario, and
makes --input-ipc-client more flexible at no cost.
This allows scaling secondary subtitles independently from primary subtitles. The option defaults to 1 like --sub-scale and follows the other secondary-sub-* options by not inheriting from the primary subtitle setting.
Fixes#14989.
The `ff-index` is just a index of in the track order, it doesn't carry
much meaning and may be wrong or unavailable when other than lavf
demuxer is used. Additionally some tracks may be virtual like DOVI EL
track or merged image tile grid. In which case those track are not
related to lavf at all.
No deprecation period. It was never guaranteed to match FFmpeg anyway,
so anyone who has a hard dependency on this property should reconsider.
It's not really possible to provide backward compatibility given the
ambiguity of this index. It's better to make it unavailable than making
mismatch. For user it's clear when it's not available, but not possible
to know when it's wrong.
Implement `lavfi-tempo` audio filter, which uses `atempo` or `ascale`
form libavfilter for setting the tempo.
Users (myself included) seem to be always looking for alternative tempo
scalers to try, and this provides a faster implementation (or two), and
may prove useful beyond performance/speed.
`atempo` is picked as a default, and as a fall-back if `ascale` is not
available.
Signed-off-by: Mohammad AlSaleh <CE.Mohammad.AlSaleh@gmail.com>
This filter only converts SDR to HDR, so disable it if we have already
HDR on input. Note that it also seems to be disabled if HDR is disabled
in Windows, but we don't check that, because filters are not related to
display. Use conditional profile to enable this filter when needed, this
commit is only small convenience change.
Fixes: #17800
This is mostly useful for SDR mode where previously we would output 203
nits, which on Windows is considered HDR, because reference white is
fixed at 80 nits in SDR mode. Which in turn causes additional
tone-mapping when using scRGB output.
Note that for SDR transfers this doesn't change the luminance, but
instead causes more aggressive tone-mapping, might not be fully
expected. But maybe we should follow system setting for better of for
worse.
Fixes: https://github.com/mpv-player/mpv/issues/17850
Not fully, because when ICC profile is embeded in content, libplacebo
will override our luminance, this will be fixed separately.
To avoid those awkward definitions. Initially much lower version was
required, but after changes it landed at 7.87.0, so we might as well
bump it one up.
It can be avoided by extracting just the code to update the seekbar and
its chapter markers. This avoids log spam and is more efficient for DVD
and Blu-ray menus which continously update duration and have chapter
markers.
The livemarkers option is removed since updating the chapter markers is
no longer expensive like reiniting.
Adds an optional keep-open argument to all select.lua script bindings
that prevents the menu from closing after a selection.
Menus that display selection state (tracks, audio device) or a current
position indicator (playlist, chapter, edition, subtitle line) are
wrapped in a recursive function so the list is rebuilt after each
selection and the indicators remain accurate. default_item is passed to
preserve the cursor position on the last selected item.
The history confirmation dialog reopens the history menu when No is
selected, and closes when Yes is selected as there is nothing to show
anymore.
We shouldn't default to no verification in current year. User can
opt-out if needed.
Keep it disable for builds without libcurl when libavformat is older
than 63.0.100. This is done to match ffmpeg's timeline for enabling
tls_verify by default in lavf, also to ensure we the default verify
locations will be loaded on such version.
this was initially part of draw-preview but was later moved to a
separate property because it was deemed useful outside of just
thumbnail preview. however this causes bugs when a thumbnailer
observes draw-request and the draw rectangle doesn't change (e.g
due to getting clamped around the border).
add back hover-sec which makes the draw-request more self
contained and removes this footgun.
Fixes: https://github.com/mpv-player/mpv/pull/17518#discussion_r3256017469
Unlike --term-playing-msg, the --term-title string is printed in an
escape sequence already. If we print other escapes during this sequence,
it will abort the sequence and dump the rest of the title string as a
visible string to the user, and possibly beep as well, since the title
string can end with a bel character.
Also updates the manpage to remove a comment about win32, since
terminal-win.c does handle OSC title sequences, calling SetConsoleTitleW.
Note that when the video params don't change, the check in
player/video.c does not call vo_reconfig2 and the _NET_ACTIVE_WINDOW
message is not sent. As far as I can tell, the same limitation is true
for the macOS implementation, but I can't test that.
Link Mauve