Add ad_dsd, a pass-through decoder converting raw DSD audio to DoP frames, enabled with --audio-spdif=dsd. DST compressed audio is losslessly decompressed to DSD first.
DoP output requires an AO with support for the format (currently
ao_wasapi in exclusive mode) and a DoP capable DAC. Will fallback to PCM
if not supported.
FFmpeg's DSD decoders convert to PCM by default, but that conversion is
deprecated. Request AV_SAMPLE_FMT_DSD instead, will be converted by SWR,
when needed.
determine_codec_params() warns when it cannot determine a codec profile.
Some passthrough formats use fixed output parameters and do not require
the probed profile or sample rate making the warning misleading.
Warn only when a value used to configure the selected passthrough format
is missing: the profile for DTS-HD, or the sample rate for core DTS and
AC-3.
Signed-off-by: Nathan Lucas <nlucasgit@gmail.com>
The spdif decoder uses avformat/spdifenc. Some spdifenc paths keep
muxer state across packets, such as partial TrueHD MAT frames. After a
seek, that state belongs to the old stream position and can cause the
next packet to be muxed with stale timing or buffering state.
On decoder reset, discard the current spdif muxer context. The next
usable input packet will recreate the muxer through the existing
initialization path.
Cache codec parameters from the initial probe so recreating the muxer
does not probe a partial packet after a seek or replace known values
with fallbacks.
A fresh TrueHD spdif muxer needs a TrueHD major sync before it can begin
muxing the stream. Startup or post-seek playback may begin on a TrueHD
access unit that does not have major sync, so drop TrueHD packets until
a major sync access unit is seen. This also gives the downstream decoder
a clean restart point after seeks. Warn periodically if no major sync
has been found.
Partially addresses: https://trac.ffmpeg.org/ticket/9569
Signed-off-by: Nathan Lucas <nlucasgit@gmail.com>
c522d0dfbd added parser to avoid opening
decoder and left decoder only for DTS. Since then more audio codec needs
decoder, so open decoder always when it might be needed. Exclude only
AC3, other codec have profile to be extracted.
Fixes: c522d0dfbd
Adds support for extracting codec profile. Old properties are redirected
to new one and removed from docs. Likely will stay like that forever as
there is no reason to remove them.
As a effect of unification of properties between audio and video,
video-codec will now print codec (format) descriptive name, not decoder
long name as it were before. In practice this change fixes what docs
says. If you really need decoder name, use the `track-list/N/decoder-desc`.
Lots of filters have generic internal function names like "process".
On a stack trace, all of the different filters use this name,
which causes confusion of the actual filter being processed.
This renames these internal function names to carry the filter names.
This matches what had already been done for some filters.
No idea how things previously worked without having these set, but
apparently they did...
If this was a normal encoder to muxer case, we would utilize
`avcodec_parameters_to_context`, but alas this is not.
Fixes: #13794
Fix DTS passthrough playback of 44.1 khz content. Also, take into account that there are some DTS variants with a samplerate of 96khz (e.g. DTS 24/96), somehow they are recognized wrongly as 48khz by the code. Don´t rely on this "bug", do it correctly. Now every samplerate above 44.1Khz is correctly treated as 48khz, and 44.1khz files are treated as 44.1khz for bitstreaming.
The avpkt was created once on decoder init but destroyed each time the
filter was destroyed, this obviously can't work. Move the packet alloc
to the filter init function instead.
fixes: 4574dd5dc6
c784820454 introduced a bool option type
as a replacement for the flag type, but didn't actually transition and
remove the flag type because it would have been too much mundane work.
This has been a long standing annoyance - ffmpeg is removing
sizeof(AVPacket) from the API which means you cannot stack-allocate
AVPacket anymore. However, that is something we take advantage of
because we use short-lived AVPackets to bridge from native mpv packets
in our main decoding paths.
We don't think that switching these to `av_packet_alloc` is desirable,
given the cost of heap allocation, so this change takes a different
approach - allocating a single packet in the relevant context and
reusing it over and over.
That's fairly straight-forward, with the main caveat being that
re-initialising the packet is unintuitive. There is no function that
does exactly what we need (what `av_init_packet` did). The closest is
`av_packet_unref`, which additionally frees buffers and side-data.
However, we don't copy those things - we just assign them in from our
own packet, so we have to explicitly clear the pointers before calling
`av_packet_unref`. But at least we can make a wrapper function for
that.
The weirdest part of the change is the handling of the vtt subtitle
conversion. This requires two packets, so I had to pre-allocate two in
the context struct. That sounds excessive, but if allocating the
primary packet is too expensive, then allocating the secondary one for
vtt subtitles must also be too expensive.
This change is not conditional as heap allocated AVPackets were
available for years and years before the deprecation.
Change all OPT_* macros such that they don't define the entire m_option
initializer, and instead expand only to a part of it, which sets certain
fields. This requires changing almost every option declaration, because
they all use these macros. A declaration now always starts with
{"name", ...
followed by designated initializers only (possibly wrapped in macros).
The OPT_* macros now initialize the .offset and .type fields only,
sometimes also .priv and others.
I think this change makes the option macros less tricky. The old code
had to stuff everything into macro arguments (and attempted to allow
setting arbitrary fields by letting the user pass designated
initializers in the vararg parts). Some of this was made messy due to
C99 and C11 not allowing 0-sized varargs with ',' removal. It's also
possible that this change is pointless, other than cosmetic preferences.
Not too happy about some things. For example, the OPT_CHOICE()
indentation I applied looks a bit ugly.
Much of this change was done with regex search&replace, but some places
required manual editing. In particular, code in "obscure" areas (which I
didn't include in compilation) might be broken now.
In wayland_common.c the author of some option declarations confused the
flags parameter with the default value (though the default value was
also properly set below). I fixed this with this change.
Let's see how much everyone hates this. Leaving it enabled seems
problematic, because libavcodec returns an unspecific error if it
doesn't like it.
Fixes: #6300
Libav seems rather dead: no release for 2 years, no new git commits in
master for almost a year (with one exception ~6 months ago). From what I
can tell, some developers resigned themselves to the horrifying idea to
post patches to ffmpeg-devel instead, while the rest of the developers
went on to greener pastures.
Libav was a better project than FFmpeg. Unfortunately, FFmpeg won,
because it managed to keep the name and website. Libav was pushed more
and more into obscurity: while there was initially a big push for Libav,
FFmpeg just remained "in place" and visible for most people. FFmpeg was
slowly draining all manpower and energy from Libav. A big part of this
was that FFmpeg stole code from Libav (regular merges of the entire
Libav git tree), making it some sort of Frankenstein mirror of Libav,
think decaying zombie with additional legs ("features") nailed to it.
"Stealing" surely is the wrong word; I'm just aping the language that
some of the FFmpeg members used to use. All that is in the past now, I'm
probably the only person left who is annoyed by this, and with this
commit I'm putting this decade long problem finally to an end. I just
thought I'd express my annoyance about this fucking shitshow one last
time.
The most intrusive change in this commit is the resample filter, which
originally used libavresample. Since the FFmpeg developer refused to
enable libavresample by default for drama reasons, and the API was
slightly different, so the filter used some big preprocessor mess to
make it compatible to libswresample. All that falls away now. The
simplification to the build system is also significant.
Just an implementation detail that can be cleaned up now. Internally,
m_config maintains a tree of m_sub_options structs, except for the root
it was not defined explicitly. GLOBAL_CONFIG was a hack to get access to
it anyway. Define it explicitly instead.
ad_lavc and vd_lavc use the lavc_process() helper to translate the
FFmpeg push/pull API to the internal filter API (which completely
mismatch, even though I'm responsible for both, just fucking kill me).
This interface was "slightly" too tight. It returned only a bool
indicating "progress", which was not enough to handle some cases (see
following commit).
While we're at it, move all state into a struct. This is only a single
bool, but we get the chance to add more if needed.
This fixes mpv falling asleep if decoding returns an error during
draining. If decoding fails when we already sent EOF, the state machine
stopped making progress. This left mpv just sitting around and doing
nothing.
A test case can be created with: echo $RANDOM >> image.png
This makes libavformat read a proper packet plus a packet of garbage.
libavcodec will decode a frame, and then return an error code. The
lavc_process() wrapper could not deal with this, because there was no
way to differentiate between "retry" and "send new packet". Normally, it
would send a new packet, so decoding would make progress anyway. If
there was "progress", we couldn't just retry, because it'd retry
forever.
This is made worse by the fact that it tries to decode at least two
frames before starting display, meaning it will "sit around and do
nothing" before the picture is displayed.
Change it so that on error return, "receiving" a frame is retried. This
will make it return the EOF, so everything works properly.
This is a high-risk change, because all these funny bullshit exceptions
for hardware decoding are in the way, and I didn't retest them. For
example, if hardware decoding is enabled, it keeps a list of packets,
that are fed into the decoder again if hardware decoding fails, and a
software fallback is performed. Another case of horrifying accidental
complexity.
Fixes: #6618
This can be due to unsupported sample formats (see previous commits),
minor allocation failures, and similar things. For identifying the exact
cause it's buried too deep in abstractions. But most time it doesn't
happen anyway, since it's extremely rare that new audio formats are
added.
Fixes stupid messages with a opus/mkv test file that had an absurdly
huge codec delay.
This file fully skips several frames at the start. ad_lavc.c trimmed
these frames to 0 samples and returned them. The next layer
(f_decoder_wrapper.c) saw discontinuous PTS values, because the PTS
values increased by a frame, but amounted to 0 audio samples. This was
harmless, but logged PTS discontinuity errors.
Apparently, for bit streaming DTS-HD MA is specified to be handled as an
eight channel (7.1) bit stream, while DTS-HD HRA is specified to be
handled as a stereo bit stream.
Define a variable for this, and utilize it to set the correct values
for both the DTS-HD bit streaming rate, as well as the channel count
for the SPDIF encoder.
Fixes#6148
This was always a legacy thing. Remove it by applying an orgy of
mp_get_config_group() calls, and sometimes m_config_cache_alloc() or
mp_read_option_raw().
win32 changes untested.
Kacper Michajłow