Performance seems pretty much unchanged but I no longer get nasty spikes
on NUMA systems, probably because glBufferSubData runs in the driver or
something.
As a simplification of the code, we also just size the PBO to always
have the full size, even for cropped textures. This seems slower but not
by relevant amounts, and only affects e.g. --vf=crop. It also slightly
increases VRAM usage for textures with big strides.
This new code path is especially nice because it no longer depends on
GL_ARB_map_buffer_range, and no longer uses any functions that can
possibly fail, thus simplifying control flow and seemingly deprecating
the manpage's claim about possible image corruption.
In theory we could also reduce NUM_PBO_BUFFERS since it doesn't seem
like we're streaming uploads anyway, but leave it in there just in
case some drivers disagree...
It used to use the "encoding" section. Change this to the default
section to remove another small special case. encoding-profiles.conf
didn't use this by default anyway. The previous revert could mitigate
potential impacts of this a little.
This is more of a niche usecase than --ytdl-format and --ytdl-raw-options,
so a simple script option should be enough.
Either create lua-settings/ytdl_hook.conf with
'exclude=example.com,sub.example.com' option or
"--script-opts=ytdl_hook-exclude=example.com,sub.example.com"
This just indicates a fixed linear coefficient to multiply into the
signal, similar to the old option --target-brightness (but the inverse
thereof). Good for testing purposes, which is why I added it. (This also
corresponds somewhat to what zimg does)
It's now possible to request non-dumb mode as a user, even when not
using any non-dumb features. This change is mostly intended for testing,
so I can easily switch between dumb and non-dumb mode on default
settings. The default behavior is unaffected.
Was at least somewhat broken, and is misleading. I don't really have an
idea why FFmpeg has two AVOptions here anyway. We don't need to care,
and I'm only aware of 1 user trying this option ever.
See #4579.
This is exposed so that bjin/mpv-prescalers can use textureGatherOffset
for performance.
Since there are now quite a lot of parameters where it isn't quite clear
why they're all defined, add a paragraph to the man page that explains
them a bit.
This helps prevent unnaturally, weirdly colorized blown out highlights
for direct images of the sunlit sky and other way-too-bright HDR
content. I was debating whether to set the default at 1.0 or 2.0, but
went with the more conservative option that preserves more detail/color.
This is more efficient on my machine (nvidia), but only when applied to
groups of exactly 4 texels. So we switch to the more efficient
textureGather for groups of 4. Some notes:
- textureGatherOffset seems to be faster than textureGather by a
non-negligible amount, but for some reason, textureOffset is still
slower than a straight-up texture
- textureGather* requires GLSL 400; and at least on nvidia, this
requires actually allocating a GL 4.0 context.
- the code in opengl/common.c that clamped the GLSL version to 330 is
deprecated, because the old user shader style has been removed
completely in the meantime
- To combat the growing complexity of the polar sampling code, we drop
the antiringing functionality from EWA shaders completely, since it
never really worked well for EWA to begin with. (Horrific artifacting)
This allows filter functions to be prematurely cut off once their
contributions start becoming insignificant. This effectively prevents
wasted GPU time sampling from parts of the function that are essentially
reduced to zero by the window function, providing anywhere from a 10% to
20% speedup. (5700μs -> 4700μs for me)
This is more confusing than it helps, and forces escaping more stuff.
For example, for string lists we could remove all need for escaling with
-add and -pre.
The user can simply use multiple of those options.
This replaces `vo-performance` by `vo-passes`, bringing with it a number
of changes and improvements:
1. mpv users can now introspect the vo_opengl passes, which is something
that has been requested multiple times.
2. performance data is now measured per-pass, which helps both
development and debugging.
3. since adding more passes is cheap, we can now report information for
more passes (e.g. the blit pass, and the osd pass). Note: we also
switch to nanosecond scale, to be able to measure these passes
better.
4. `--user-shaders` authors can now describe their own passes, helping
users both identify which user shaders are active at any given time
as well as helping shader authors identify performance issues.
5. the timing data per pass is now exported as a full list of samples,
so projects like Argon-/mpv-stats can immediately read out all of the
samples and render a graph without having to manually poll this
option constantly.
Due to gl_timer's design being complicated (directly reading performance
data would block, so we delay the actual read-back until the next _start
command), it's vital not to conflate different passes that might be
doing different things from one frame to another. To accomplish this,
the actual timers are stored as part of the gl_shader_cache's sc_entry,
which makes them unique for that exact shader.
Starting and stopping the time measurement is easy to unify with the
gl_sc architecture, because the existing API already relies on a
"generate, render, reset" flow, so we can just put timer_start and
timer_stop in sc_generate and sc_reset, respectively.
The ugliest thing about this code is that due to the need to keep pass
information relatively stable in between frames, we need to distinguish
between "new" and "redrawn" frames, which bloats the code somewhat and
also feels hacky and vo_opengl-specific. (But then again, this entire
thing is vo_opengl-specific)
The changes to path list options is basically getting rid of the need to
pass multiple paths to a single option. Instead, you can use the option
multiple times. The old behavior can be used by using the -set suffix
with the option.
Change some options to path lists. For example --script is now append by
default, and if you use --script-set, you need to use ":"/";" as
separator instead of ",".
--sub-paths/--audio-file-paths is a deprecated alias now, and will break
if the user tries to pass multiple paths to it. I'm assuming that if
these are used, most users will pass only 1 path anyway.
--opengl-shaders has more compatibility handling, since it's probably
rather common that users pass multiple options to it.
Also document all that in the manpage.
I'll probably regret this later, as it somewhat increases the complexity
of the option parser, rather than increasing it.
I noticed that the previous default, bitstream, actually breaks with
some shitty anamorphic DVD rips that signal square pixel aspect in the
bitstream. So I think the "container" method is a better default.
You could do mpv_set_option(h, "no-fs", ""), which would behave like
"--no-fs" on the command line. At one point, this had to be emulated for
compatibility, and printed a deprecation warning. This was almost a year
ago, so remove it.
This was especially grating because it causes problems with the
option/property unification, uses as only thing OPT_FLAG_STORE, and
behaves weird with the client API or scripts.
It can be reimplemented in a much simpler way, although it needs
slightly more code. (Simpler because less special cases.)
cehoyos, who did not agree to the LGPL relicensing, added this in commit
240b743e. The actual implementation of it is already guarded with
HAVE_GPL. The field_dominance field in the option struct won't be
guarded.
We won't keep GPL-only core code forever, so deprecate it as well. To
apply forced deinterlacing, a libavfilter filter can probably be
removed, or we merge this functionality into the --deinterlace option
(without using copyrighted stuff).
It was extended by "seru" in 8d190244. This person could not be reached
(or does not reply), and it's in the way of LGPL relicensing. Deprecate
it, and mark the (probably) affected parts of the code with HAVE_GPL. To
be fair, even though the osd.c parts were refactored from the original
code, there's probably no copyright by seru on it. But for now play it
save. The mere existence of a 3rd OSD level is certainly not
copyrightable, so you still can set osd-level to 3 - just that it does
nothing.
A relic of mplayer had 'I' as the keybind to show the filename of the
currently playing file on the OSD. mpv does not do this by default.
This commit removes this incorrect information from the mpv manage.
This introduces (yet another..) mp_colorspace members, an enum `light`
(for lack of a better name) which basically tells us whether we're
dealing with scene-referred or display-referred light, but also a bit
more metadata (in which way is the scene-referred light expected to be
mapped to the display?).
The addition of this parameter accomplishes two goals:
1. Allows us to actually support HLG more-or-less correctly[1]
2. Allows people playing back direct “camera” content (e.g. v-log or
s-log2) to treat it as scene-referred instead of display-referred
[1] Even better would be to use the display-referred OOTF instead of the
idealized OOTF, but this would require either native HLG support in
LittleCMS (unlikely) or more communication between lcms.c and
video_shaders.c than I'm remotely comfortable with
That being said, in principle we could switch our usage of the BT.1886
EOTF to the BT.709 OETF instead and treat BT.709 content as being
scene-referred under application of the 709+1886 OOTF; which moves that
particular conversion from the 3dlut to the shader code; but also allows
a) users like UliZappe to turn it off and b) supporting the full HLG
OOTF in the same framework. But I think I prefer things as they are
right now.
st2084 and std-b67 are really weird names for PQ and HLG, which is what
everybody else (including e.g. the ITU-R) calls them. Follow their
example.
I decided against naming them bt2020-pq and bt2020-hlg because it's not
necessary in this case. The standard name is only used for the other
colorspaces etc. because those literally have no other names.
List of changes:
1. Kill nom_peak, since it's a pointless non-field that stores nothing
of value and is _always_ derived from ref_white anyway.
2. Kill ref_white/--target-brightness, because the only case it really
existed for (PQ) actually doesn't need to be this general: According
to ITU-R BT.2100, PQ *always* assumes a reference monitor with a
white point of 100 cd/m².
3. Improve documentation and comments surrounding this stuff.
4. Clean up some of the code in general. Move stuff where it belongs.
"Almost" because this might contain copyright by michael, who agreed
with LGPL, but only once the core is LGPL. This is preparation for that
to happen.
Apart from that, the usual remarks apply. In particular, dec_video.c
started out quite chaotic with no modularization, but was later
basically gutted, and in general rewritten a bunch of times. Not going
to give a history lesson.
Special attention needs to be given to 3 patches by cehosos, who did not
agree to the relicensing:
240b743ebd: --field-dominance
e32cbbf7dc: reinit VO if aspect ratio changes
306f6243fd: use container aspect if codec aspect unset (?)
The first patch is pretty clearly still in the current code, and needs
to be disabled for LGPL.
The functionality of the second patch is still active, but implemented
completely different, and as part of general frame parameter changes (at
the time of the patch, MPlayer already reinitialized the VO on frame
size and pixel format changes - all this was merged into a single check
for changing image parameters).
The third patch makes me a bit more uncomfortable. It appears the code
was moved to dec_video.c in de68b8f23c, and further changed in
82f0d373, 0a0bb905, and bf13bd0d. You could claim that cehoyos'
copyright still sticks. Fortunately, we implement alternative aspect
detection, which is simpler and probably preferable, and which arguably
contains none of the original code and logic, and thus should be fully
safe.
While I don't know if cehoyos' copyright actually still applies, I'm
more comfortable with making the code GPL-only for now. Also change the
default to use the (in future) plain LGPL code, and deprecate the one
associated with the GPL code, so we can eventually remove the GPL code.
But it's also possible we decide that the copyright doesn't apply, and
undo the deprecation and GPL guards.
I expect that users won't notice anything. If you ask me, the old aspect
method was probably an accidental bug instead of intentional behavior.
Although, the new aspect method was broken too, so I had to fix it.
image_writer.c has code originating from vf_screenshot.c, vo_jpeg.c, and
potentially others. vo_image.c is based on a bunch of those VOs as well,
and the intention was to replace them with a single codebase.
vo_tga.c was written by someone who was not or not could be contacted,
but it doesn't matter anyway, as no code from that initial patch was
used.
One rather old patch (57f77bb41a) reordered by libjpeg patch API calls,
and the author of the patch was not contacted. But at least with the
smoothing_factor override removed, this pretty much exactly corresponds
to the official libjpeg API example (and might even reflect a change to
those - didn't dig deeper). This removes the -jpeg-smooth option. While
we're at it, remove all the other dropped jpeg options from the manpage
(which was forgotten in past changes).
It was an attempt to move some MPlayer filters (which were removed from
mpv) to external, loadable filters. That worked well, but then the
MPlayer filters were ported to libavfilter (independently), so they're
available again. Also there is a more widely supported and more advanced
loadable filter system supported by mpv: vapoursynth.
In conclusion, vf_dlopen is not useful anymore, confusing, and requires
quite a bit of code (and probably wouldn't survive the rewrite of the
mpv video filter chain, which has to come at some point). It has some
implicit dependencies on internal conventions, like possibly the format
names dropped in the previous commit.
We also deprecated it last release. Drop it.
Before this, options with co->data==NULL (i.e. no storage) were not
added to the bridge (except alias options). There are a few options
which might make sense to allow via the bridge ("profile" and
"include"). So allow them.
In command_init(), we merely remove the co->data check, the rest of the
diff is due to switching the if/else branches for convenience.
We also must explicitly error on M_PROPERTY_GET if co->data==NULL. All
other cases check it in some way.
Explicitly exclude options from the property bridge, which would be
added due this, and the result would be pointless.
Implements JS with almost identical API to the Lua support.
Key differences from Lua:
- The global mp, mp.msg and mp.utils are always available.
- Instead of returning x, error, return x and expose mp.last_error().
- Timers are JS standard set/clear Timeout/Interval.
- Supports CommonJS modules/require.
- Added at mp.utils: getenv, read_file, write_file and few more.
- Global print and dump (expand objects) functions.
- mp.options currently not supported.
See DOCS/man/javascript.rst for more details.
Not all tools apply line breaking. Which is probably good, because you
wouldn't be able to put lines in there which should _not_ be broken.
Don't ask me whether there is an "official" git convention for this.
Sometime earlier, "sub-ass-style-override" was renamed to
"sub-ass-override". The option's documentation was updated to support
this, but not the documentation for the hotkey that toggles this option.
This commit updates the keyboard shortcut documentation to fix that.
Signed-off-by: wm4 <wm4@nowhere>
I call it `mobius` because apparently the form f(x) = (cx+a)/(dx+b) is
called a Möbius transform, which is the algorithm this is based on. In
the extremes it becomes `reinhard` (param=0.0 and `clip` (param=1.0),
smoothly transitioning between the two depending on the parameter.
This is a useful tone mapping algorithm since the tunable mobius
transform allows the user to decide the trade-off between color accuracy
and detail preservation on a continuous scale. The default of 0.3 is
already far more accurate than `reinhard` while also being reasonably
good at preserving highlights, without suffering from the overall
brightness drop and color distortion of `hable`.
For these reasons, make this the new default. Also expand and improve
the documentation for these tone mapping functions.
List of changes:
1. Rename `signfs` to `scale`, to better match what it actually does
(force --sub-scale to apply to ASS subtitles), and fix the blatantly
wrong documentation (it actually specifically does *not* apply to
signs)
2. Rename `--sub-ass-style-override` to `--sub-ass-override` to help
reduce confusion between it and `--sub-ass-force-style`, as well as
pointing out that it doesn't necessarily actually override styles.
(The new `scale` option, for example, only sets
ASS_OVERRIDE_BIT_FONT_SIZE, but not ASS_OVERRIDE_BIT_STYLE)
3. Mention that `--sub-ass-override` is generally sort of smart about
only overriding dialog, not signs.
Niklas Haas