If a single person complains, I will readd it. But I don't expect that
this will happen.
The main reason for removing this is that it's some of the most unclean
code remaining, it's unmaintained, and I've never ever heard of someone
using it.
This call was used limited the buffer size if installed RAM was below 16
MB. This stopped being useful a decade ago. The check could also
overflow on 32 bit systems. Just get rid of it.
In most places where af_fmt2bits is called to get the bits/sample, the
result is immediately converted to bytes/sample. Avoid this by getting
bytes/sample directly by introducing af_fmt2bps.
The i_bps members of the sh_audio and dev_video structs are mostly used
for displaying the average audio and video bitrates. Keeping them in
bits-per-second avoids truncating them to bytes-per-second and changing
them back lateron.
So, basically this worked only with streams that were not local files,
because stream_dvd.c "intercepts" local files to check whether they
point to DVD images. This means if a stream is not writeable, we have to
try the next stream implementation.
Unbreaks 2-pass encoding.
Also sneak in some cosmetics.
setmode() exists on Windows/msvcrt only, so there's no need for a
config test.
I couldn't reproduce the problem with seekable pipes on wine, so axe
it. (I'm aware that it still could be an issue on real Windows.)
For some reason, we support writeable streams. (Only encoding uses that,
and the use of it looks messy enough that I want to replace it with FILE
or avio today.)
It's a chaos: most streams do not actually check the mode parameter like
they should. Simplify it, and let streams signal availability of write
mode by setting a flag in the stream info struct.
Stop using it in most places, and prefer STREAM_CTRL_GET_SIZE. The
advantage is that always the correct size will be used. There can be no
doubt anymore whether the end_pos value is outdated (as it happens often
with files that are being downloaded).
Some streams still use end_pos. They don't change size, and it's easier
to emulate STREAM_CTRL_GET_SIZE using end_pos, instead of adding a
STREAM_CTRL_GET_SIZE implementation to these streams.
Make sure int64_t is always used for STREAM_CTRL_GET_SIZE (it was
uint64_t before).
Remove the seek flags mess, and replace them with a seekable flag. Every
stream must set it consistently now, and an assertion in stream.c checks
this. Don't distinguish between streams that can only be forward or
backwards seeked, since we have no such stream types.
stream.start_pos was needed for optical media only, and (apparently) not
for very good reasons. Just get rid of it.
For stream_dvd, we don't need to do anything. Byte seeking was already
removed from it earlier.
For stream_cdda and stream_vcd, emulate the start_pos by offsetting the
stream pos as seen by the rest of mpv.
The bits in discnav.c and loadfile.c were for dealing with the code
seeking back to the start in demux.c. Handle this differently by
assuming the demuxer is always initialized with the stream at start
position, and instead seek back if initializing the demuxer fails.
Remove the --sb option, which worked by modifying stream.start_pos. If
someone really wants this option, it could be added back by creating a
"slice" stream (actually ffmpeg already has such a thing).
Some options change from percentages to number of kilobytes; there are
no cache options using percentages anymore.
Raise the default values. The cache is now 25000 kilobytes, although if
your connection is slow enough, the maximum is probably never reached.
(Although all the memory will still be used as seekback-cache.)
Remove the separate --audio-file-cache option, and use the cache default
settings for it.
Use the time as returned by mp_time_us() for mpthread_cond_timedwait(),
instead of calculating the struct timespec value based on a timeout.
This (probably) makes it easier to wait for a specific deadline.
Previous to this commit, read_chunk was not set in stream_smb. The
cache was therefore filled in small 8K chunks. This resulted in poor
performance when compared to, for example, smbnetfs on the same
network.
The value of 128k is chosen both because it is emperically
the "levelling off point" for throughput into mpv's cache, and because
it is the value chosen by smbnetfs when serving smb shares to
mpv.
Note that this change has no effect unless --cache is explicitly
specified as smb:// streams do not activate cache by default. This is
because the default cache size of 320K is so small it actually makes
smb:// perfomance worse. For best results use at least --cache=1024.
Also remove MSGL_SMODE and friends.
Note: The indent in options.rst was added to work around a bug in
ReportLab that causes the PDF manual build to fail.
This used global variables for the asynchronous interrupt callback.
Pick the simple and dumb solution and stuff the callback into
mpv_global. Do this because interrupt checking should also work in the
connect phase, and currently stream creation equates connecting.
Ideally, this would be passed to the stream on creation instead, or
connecting would be separated from creation. But since I don't know yet
which is better, and since moving stream/demuxer into their own thread
is something that will happen later, go with the mpv_global solution.
This is the only function which actually used the time argument of
stream_check_interrupt(). Considering that the whole player freezes
anyway, this is not worth the complication.
Also generally reduce the maximum wait time due to timeout. Introduce
exponential backoff, which makes the first reconnect retries faster, but
still waits up to 500ms in the later retries.
Fix all include statements of the form:
#include "libav.../..."
These come from MPlayer times, when FFmpeg was somehow part of the
MPlayer build tree, and this form was needed to prefer the local files
over system FFmpeg.
In some cases, the include statement wasn't needed or could be replaced
with mpv defined symbols.
This was accidentally completely destroyed with commit 24f1878e. I
didn't notice it when testing, because forward seeking still worked
mostly.
The issue was that dvd_seek_to_time() actually called stream_seek(),
which was supposed to call the byte-level seek function dvd_seek(). So
we have to restore this function, and replace all generic stream calls
with stream_dvd.c internal ones. This also affects stream->pos (now a
random number as far as stream_dvd.c is concerned) and stream_skip().
I hate tabs.
This replaces all tabs in all source files with spaces. The only
exception is old-makefile. The replacement was made by running the
GNU coreutils "expand" command on every file. Since the replacement was
automatic, it's possible that some formatting was destroyed (but perhaps
only if it was assuming that the end of a tab does not correspond to
aligning the end to multiples of 8 spaces).
This was broken at some unknown point (even before the recent cache
changes). There are several problems:
- stream_dvd returning a random stream position, confusing the cache
layer (cached data and stream data lost their 1:1 corrospondence by
position)
- this also confused the mechanism added with commit a9671524, which
basically triggered random seeking (although this was not the only
problem)
- demux_lavf requesting seeks in the stream layer, which resulted in
seeks in the cache or the real stream
Fix this by completely removing byte-based seeking from stream_dvd. This
already works fine for stream_dvdnav and stream_bluray. Now all these
streams do time-based seeks, and pretend to be infinite streams of data,
and the rest of the player simply doesn't care about the stream byte
positions.
resize_cache() checks the size itself and clamps the size to the valid
range if necessary, so we don't need these checks. In fact, the checks
are different. Also, output the cache size after clamping, instead of
before.
Use NtQueryVolumeInformationFile instead of GetDriveType for detecting
remote filesystems on Windows. This has the advantage of working
directly on the file handle instead of needing a path and it works
unmodified in Cygwin where the previous code wouldn't understand Cygwin
paths or symlinks.
There is some risk in using NtQueryVolumeInformationFile, since it's an
internal function and its behaviour could change at any time or it could
be removed in a future version of Windows, however it's documented[1] in
the WDK and it's used successfully by Cygwin, so it should be fine. If
it's removed, the code should fail gracefully by treating all files as
local.
[1]: http://msdn.microsoft.com/en-us/library/windows/hardware/ff567070.aspx
Signed-off-by: wm4 <wm4@nowhere>
Merge the cache_read function into cache_fill_buffer, since there's
not much reason to keep them separate. Also, simply call read_buffer()
to see if there's any readable data, instead of checking for the
condition manually.
The only tricky part is keeping the cache contents, which is made simple
by allocating the new cache while still keeping the old cache around,
and then copying the old data.
To explain the "Don't use this when playing DVD or Bluray." comment: the
cache also associates timestamps to blocks of bytes, but throws away the
timestamps on seek. Thus you will experience strange behavior after
resizing the cache until the old cached region is exhausted.
The only difference is that the MP_DBG message is not printed anymore if
the current user read position is outside of the current cache range.
(In order to handle seek_limit==0 gracefully in the normal case of
linear reading, change the comparison from ">=" to ">".)
Until now, this could never happen, because new data was simply always
appended to the end of the cache. But for making stream cache resizing
easier, doing it this way seems advantageous. It also makes it harder to
make the internal state inconsistent. (Before this change it could
happen that cache and stream position went out of sync if the read
position was adjusted "inappropriately".)
Until now, cache_read() (which calls read_buffer()) could return short
reads. This was a simplification allowed by the stream interface. But
for cache resizing, it will be more practical to make read_buffer() do
a full read.
Seems like a good idea. One possible bad effect would be slowing down
uncached controls, but they're already slow. The good thing is that
many controls make intrusive changes to the stream (at least controls
which do write accesses), so the cached parameters should be updated.
There are two kind of encryption for Blu-ray disc, AACS and BD+,
and both of them can be checked through BLURAY_DISC_INFO object.
This commit makes the bluray and bdnav streams refuse playback
if AACS/BD+ is detected and decryption is failed.
The angles should be set and queried only if a valid title is
selected. Also, in navigation mode, there are some limitations
which make it impossible to query current title/angle.
This commit introduces new stream protocols: bdnav(and others).
bdnav stream shares lots of codes with original bluray stream, so
it's not separated in different source file.
Major difference from bluray is that bdnav does not support longest
title because there is no way to query that information.
bdnav://menu and bdnav://first correspond to top menu title and
first play title respectively, though they often point same title.
Also, binary position based seeking has been removed, because it
didn't have no point.
wm4