* Add timeouts when reading from sockets in Socks5Connector
* Add a Socks5 timeout test for a connection reply
---------
Co-authored-by: Wojciech Nagórski <wojtpl2@gmail.com>
Co-authored-by: Rob Hague <rob.hague00@gmail.com>
* Implement OpenSSH strict key exchange extension
* The pseudo-algorithm
is only valid in the initial SSH2_MSG_KEXINIT and MUST be ignored
if they are present in subsequent SSH2_MSG_KEXINIT packets.
* Only send strict kex pseudo algorithm for the first kex.
Strictly disable non-kex massages in strict kex mode.
* Unit tests for strict kex
* More unit tests
* More unit tests
* Correct file name
* Update SessionTest_ConnectingBase.cs
* More unit tests
* Delete SessionTest_Connecting_ServerSendsMaxIgnoreMessagesBeforeKexInit.cs
* Add a comment about throwing exception when inbound sequence number is about to wrap during init kex.
* Delete SessionTest_Connecting_ServerSendsDebugMessageAfterKexInit_NoStrictKex.cs
* Fix build
* Update test/Renci.SshNet.Tests/Classes/SessionTest_Connected.cs
---------
Co-authored-by: Rob Hague <rob.hague00@gmail.com>
* Init AeadCipher
* Move AeadCipher to parent folder. Move EncryptBlock/DecryptBlock from SymmetricCipher to BlockCipher
* simplify parameter name
* Implement AesGcmCipher
* Update README
* Remove protected IV from AeadCipher; Set offset to outbound sequence just like other ciphers
* Rename associatedData to packetLengthField
* Use Span<byte> to avoid unnecessary allocations
* Use `Span` to improve performance when `IncrementCounter()`
* Add `IsAead` property to `CipherInfo`. Include packet length field and tag field in offset and length when call AesGcm's `Decrypt(...)` method. Do not determine HMAC if cipher is AesGcm during kex.
* Fix build
* Fix UT
* Check `AesGcm.IsSupported` before add to the `Encryptions` collection.
Guard AES-GCM with `NET6_0_OR_GREATER`.
Insert AES-GCM ciphers right after AES-CTR ciphers but before AES-CBC ciphers, which is similar with OpenSSH:
```
debug2: ciphers ctos: chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com
debug2: ciphers stoc: chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com
```
Although Dictionary's order is not defined, from observation, it is in the same order with add. Anyway that would be another topic.
* Suppress CA1859 "Use concrete types when possible for improved performance" for `ConnectionInfo.Encryptions`.
Test `Aes128Gcm` and `Aes256Gcm` only when `NET6_0_OR_GREATER`
* Update xml doc comments. Do not treat AesGcmCipher separately in Session.cs
* Fix build
* Fix build
* Update the comment as ChaCha20Poly1305 uses a separated key to encypt the packet length and the size it 4.
* Update src/Renci.SshNet/Security/Cryptography/Cipher.cs
Co-authored-by: Rob Hague <rob.hague00@gmail.com>
* Make `AesGcmCipher` internal.
Assert offset when decrypt.
* Fix nullable error in build
* typos
---------
Co-authored-by: Rob Hague <rob.hague00@gmail.com>
* Integrate `ZLibStream` from .NET 6.0+ with SSH.NET.
* OpenSSH server does not support zlib (pre-auth); OpenSSH client still supports zlib (pre-auth)
* Correct compression algorithm name; Update README.md
* Integrate `ZLibStream` from .NET 6.0+ with SSH.NET.
* OpenSSH server does not support zlib (pre-auth); OpenSSH client still supports zlib (pre-auth)
* Correct compression algorithm name; Update README.md
* Test the compression by upload/download file
* Refactor compression.
* Move delayed compression logic to base class.
* seal Zlib
* update unit test
* update unit test to see if it can trigger integration test
* Flush zlibStream
* Fix integration test
* update test
* Update ConnectionInfo.cs
Co-authored-by: Rob Hague <rob.hague00@gmail.com>
* Update README.md
---------
Co-authored-by: Rob Hague <rob.hague00@gmail.com>
* debugging CI
* apt-get
* print memory
* x
* x
* Remove some unbounded random.Next() calls
Some of which are causing giant array allocations unnecessarily. Should stabilise CI.
* cleanup
* Handle unknown channel messages correctly
See discussion #1218 . Some servers send custom channel messages
like 'keepalive@proftpd.org' as keep alive messages. This currently
causes a NotSupportedException.
According to the spec https://datatracker.ietf.org/doc/html/rfc4254#section-5.4 :
"If the request is not recognized or is not
supported for the channel, SSH_MSG_CHANNEL_FAILURE is returned."
Send a failure message back instead of throwing an exception.
* consider WantReply before sending failure reply
* Use RemoteChannelNumber for failure message
* fix wrong ChannelNumber in SshCommand Channel Response
not directly related to the PR, was noticed during Code Review.
---------
Co-authored-by: Rob Hague <rob.hague00@gmail.com>
* SftpClient: handle the SFTP session being closed by the server
If the server closes the SFTP session but keeps the TCP connection open,
this currently causes IsConnected to return true, but any operation
fails with "the session is not open".
SftpClient.IsConnected now also check sftpSession.IsOpen. Connect()
and ConnectAsync() were reworked to take into account that the Session
may already/still be open, but the SFTP session may not. This is needed
so a reconnect works.
fixes#843 and #1153
* Always re-create session
---------
Co-authored-by: Rob Hague <rob.hague00@gmail.com>
Co-authored-by: Igor Milavec <igor.milavec@gmail.com>
* Fixed warnings in tests.
* Fixed warnings in main project.
* Fix public key.
* Further warning cleanup.
* Muted remaining warnings.
* Final cleanup.
* Fix warning.
* Fix test classes.
* Fix more internals.
* Revert "internal" in test projects
* Revert more internals.
* Revert all non-analyzer changes.
---------
Co-authored-by: Rob Hague <rob.hague00@gmail.com>
* Fix CancelAsync Cause Deadlock
* Fix CancelAsync Cause Deadlock
* Support manual cancelling if exit-signal does not cancel
* Fix switch with duplicate case
* Revert wait exit response, use existing OperationCancelledException
* Not executing callback when command is cancelled
* Add `Closed` event to `ShellStream`. Lib consumer could hook to this event to detect if channel is closed by server **in time**.
* handle `Closed` event on different thread. No need to block original thread.
* Updated dependencies.
* Reverted Microsoft.Bcl.AsyncInterfaces back to version 1.0.0.
Also added a note so we no longer try to upgrade it.
* Reverted back to Moq.
---------
Co-authored-by: Wojciech Nagórski <wojtpl2@gmail.com>
* Added guard clauses to various timeouts to ensure they don't exceed an Int32 in milliseconds.
* Fixed guard clauses.
* Updated build tags.
* Added guard clauses to various timeouts to ensure they don't exceed an Int32 in milliseconds.
* Fixed tests.
* Added additional tests.
* Replaced NoWarn with .editorconfig setting
* Fixed references to parameter names.
* Restore Write/Flush tests
* Restore write buffer to ShellStream and painfully fix the mocks
---------
Co-authored-by: Wojciech Nagórski <wojtpl2@gmail.com>
* Fix a few issues with ShellStream
The main change is to replace the Queue<byte> with a byte[] and a couple of
variables which index the start and end of the data. The remainder is mainly
slightly more careful locking semantics.
It also implements Expect(string) separately so that it can work on the bytes
and skip a lot of encoding work (this is where I wish ShellStream derived from
StreamReader).
One possibly contentious point: in fixing the Write behaviour I chose to
remove the "outgoing" buffer and immediately send the data across the channel.
Write(string) and WriteLine(string) were already doing this, and I felt it
was better to change Write(byte[]) to match rather than changing the string
methods.
* Integrate expectSize (as "windowSize" parameter)
* Rename "windowSize" to "lookback"
---------
Co-authored-by: Wojciech Nagórski <wojtpl2@gmail.com>
* Support ETM (Encrypt-then-MAC) variants for HMAC
* Support ETM (Encrypt-then-MAC) variants for HMAC
* Remove `ETM` property from `HashInfo`
* Add support for HmacMd5Etm, HmacMd5_96_Etm, HmacSha1Etm and HmacSha1_96_Etm
Explicitly specify etm even if false
* Add Encrypt-then-MAC variants to README.md
* Add back empty span to prevent auto link
* Store ETM in `HashInfo`;
Change `HMAC Create[...]Hash()` to `HashAlgorithm Create[...]Hash(out bool isEncryptThenMAC)`
* Update appveyor.yml
No nupkg nor snupkg is generated at this moment. We can add these 2 lines back later if we decide to generate nuget packages when build.
* Update appveyor.yml
---------
Co-authored-by: Rob Hague <rob.hague00@gmail.com>
* Making all unit tests pass locally.
Excluded MD5 tests on net462 because I get System.InvalidOperationException: 'This implementation is not part of the Windows Platform FIPS validated cryptographic algorithms.'
SshdConfig: do not throw for "Include", just do nothing.
Modified failing dos2unix parameters in Dockerfile.TestServer.
Forceing LF line ending for key files used by integration tests, otherwise using them causes error.
SftpClientTest.Test_Sftp_Multiple_Async_Upload_And_Download_10Files_5MB_Each times out for maxFiles=10, decreasing to 2 to make the test pass.
* Added SshCommand.InputStream.
* Added an integration test for SshCommand.InputStream.
* Reverting changes made to unit tests unrelated to this PR.
* Moved ChannelInputStream's EOF sending from Write to Dispose. Replace SshCommand.InputStream with CreateInputStream to emphasise that a (disposable) resource is created here. EndExecute also closes the _inputStream to make sure that EOF is sent (in case the user forgot to dispose the input stream). Added more unit tests: sending the input one byte at a time, not disposing the input stream, calling CreateInputStream before BeginExecute or AfterEndExecute throws exception.
* Fixing review comments.
* Fix build error after #1286
---------
Co-authored-by: ferenc.vizkeleti <ferenc.vizkeleti@innopay.hu>
Co-authored-by: Wojciech Nagórski <wojtpl2@gmail.com>
Co-authored-by: Rob Hague <rob.hague00@gmail.com>
* Allow the integration tests to run on .NET Framework
* Update appveyor.yml
* Update appveyor.yml
---------
Co-authored-by: Wojciech Nagórski <wojtpl2@gmail.com>
- Change _connectAndLazySemaphoreInitLock to a SemaphoreSlim and use it in
ConnectAsync.
- Rename it to _connectLock and only use it for connecting. Replace its
other usages (on SessionSemaphore and NextChannelNumber) with Interlocked
operations.
- Remove AuthenticationConnection semaphore. This static member placed a
process-wide limit on the number of connections an application can make.
I agree with the argument in
https://github.com/sshnet/SSH.NET/issues/409#issuecomment-457415542
(and in several other issues/PRs) that this should not be something
that the library attempts to control.
The last change broke a few tests which do things like making 100 connections.
I was tempted to delete these tests as I don't think they have much value, but
instead I just limited their concurrency.
Co-authored-by: Wojciech Nagórski <wojtpl2@gmail.com>
* Enable trim analysis and fix warnings
* Use EnableTrimAnalyzer instead of IsTrimmable
I don't know how IsTrimmable works with references
(i.e. to SshNet.Security.Cryptography)
* Add additional aot/trimming related analyzers
* Initialise the hash instance in the constructor
---------
Co-authored-by: Wojciech Nagórski <wojtpl2@gmail.com>
